SaleSold out
XAAP606- 6 Channel DSP Processor
Original price was: ₹38,999.00.₹35,999.00Current price is: ₹35,999.00.
XAMXGA6- 6 Channel mini audio mixer with 16 DSP effects
Original price was: ₹12,999.00.₹6,849.00Current price is: ₹6,849.00.
XAPMD20002- Amplifier 2X2000W rated power (8 Ω )
Original price was: ₹126,620.00.₹126,619.00Current price is: ₹126,619.00.
MODEL: PMD20002
Rated Power (8 Ω ): 2X2000W
Rated Power (4 Ω ): 2X2800W
Rated Power (2Ω ): 2x3300W
Rated Power (bridged 8 Ω ): 5500W
Rated Power (bridged 4 Ω ): 6500W
Frequency Response: 15Hz – 30kHz: ≤ 1dB
THD+N: 1W/8Ω (1kHz) ≤ 0.1%
Damping Factor: 1kHz 8Ω:>240 | SNR: ≥100dB
Input Impedance: Balanced 20KΩ Unbalanced 10KΩ
Power Supply: AC 200-240v /50-60Hz
Out of stock
Shipping & Delivery
Related products
XAIE01- UHF Single Channel Wireless In Ear Monitor System
- EIA- Standard ½ U metal case. Exquisite and concise panel with multi-function LCD display. Phase lock PLL, among the band of 16MHz, the pre-set 40 frequencies can be arbitrary switching. The bodypack receiver has an efficient power circuit which gives a long usage time. The metal housing makes it sturdy and durable
- Exclusive output ear-monitor headphone socket. Monitoring noise-cancelling earphones provided in-box can be plugged into the bodypack transmitter and the latest UHF technology enables audio transmission at zero latency.
- UHF receiver with CPU control diversity circuit, reduce frequency blind spots. Enjoy crystal clear audio output feedback without any interruption up to 100 meters
- 16MHz bandwidth with 32 channels for selection. A stable PLL oscillation circuit, with noise detection mute control function, could effectively obstruct RF interference from the environment.
- Used in stage performance and sound broadcast - Built-in Limiter circuitry eliminating distortion under excessive input levels. Front-panel 1/4-inch stereo monitoring has the headphone jack. It can replace traditional complex sound monitoring equipment, achieve the best listening effect.
XAAP606- 6 Channel DSP Processor
MODEL：AP606
6 channels digital processing.
With speaker processor, factory presets for all Pd loudspeaker models.
With Microphone processor, factory presets for Pd microphone on board & external devices.
32 Bit bus & 32 Bit DSP.
Music input 15 PEQs.
Two independent Eqs for two microphones.
Microphone input 15 PEQs with limiter & compressor.
Main output with 8 PEQs and limiter.
4 feedback cancelling mode: OFF 1 2 3.
Time delay for all output channels.
Preset management via password, ensure data safety.
XAIA8504- Integrated Amplifier, 4×500 watts amp
Combining acoustic technology and premium materials, our PD Passive Speakers are known for their colossal sound and are designed to suit any surrounding. The integrated amplifier comes with factory presets for easy and optimized performance. The setup makes it easy to save and load new presets. Bluetooth connectivity allows for easier playback and wireless microphones allows for a wider application for announcements. This makes it perfect for clubs, restaurants, gyms or where ever you want to pump a party or create an ambience. What sets this system really apart is the quality of sound. With clear crisp highs and thumping lows you are sure to impress your crowd with the auditory extavaganza , all with the flexibility of an unbeatable price.
Plug and play is the key. model IA8502 contains 2x500w atts amp while IA8504 contains 4x500w atts amp where the additional two channel could be used for surround speaker or bridged to output 900w watts to drive a massive subwoofer like sw115 or sw118.
XASW215- Dual Subwoofer, 2000 Watts
Model No.: SW215
Max SPL Long-term: 134dB
Max SPL Peak: 147dB
Response: 38Hz to 190Hz -3dB | 34Hz to 200Hz -10dB
Impedance: 4Ω
Crossover Point: 130Hz
Amplifier Requirement: 1200-1600Watts@4Ω
Number of Drivers: 2
Woofer Size / Voice Coil Diameter / Design: 15″/ 3″Inside Outside
Speaker Input/Thru output: One Speakon
Handles: 2
Pole Mount: 35mm
Dimension: H550*W700*D750 mm
Weight: 51kg
XASW115- 800W 15” Passive Subwoofer
- Model No.: SW115
- Max SPL Long-term: 128dB
- Max SPL Peak: 131dB
- Response: 48Hz-93Hz(-3dB)
- Response: 34Hz-130Hz(-10dB)
- Impedance: 8
- DSP Crossover Set: 100Hz
- Amplifier type: Class D
- Power rating(RMS): 800 Watts
- Number of Drivers: 1
- Woofer Size / Voice Coil Diameter / Design: 15″/2.5″ Outside
- Diaphragm Material: Treated paper cone
- Magnet Type: Ferrite
- Speaker input/output: XLR*2
- Cabinet Material: Birch plywood
- Handles: 2
- Pole Mount: 35mm
- Colour: Matt Black
- Weight: 23.5 kg
Xtreme Acoustics SSM12 (12”)Passive Speaker.
- MODEL：SS-M12
- System type: 12" 2 way vented
- LF Driver: 12" woofer with 2" coil
- HF Driver: 36mm precision compression driver, horn loaded
- Nominal Impedance: 8ohm
- Frequency range: 45hz-20khz(-3dB}
- Sensitivity: 96dB/M*W
- Power Rating(RMS/Program): 350/700W
- Coverage pattern: 90*60(H*V rotatable)
- Recommended amp: 350-700W
- High pass filter recommended: 4th/40hz
XAAP115SP – 800W Class D 15″ Active Sub
- AP115SP Active Sub
- Premium sound quanlity with self-amplification
- 44 Hz – 22 khz frequency range
- Lightweight, cool-running 800W Class D amp
- Biamped with 24 db/octave crossover
- Transducer protection
- Bypassable high-pass for external subwoofer
- XLR, TRS, and RCA connections
- Versatile gain, mixing, and processing controls
- Pre- or post-mix parallel outputs