Name: XAWL603- Wireless UHF Dual Channel Universal Lavalier Microphone
SKU: XAWL603
Availability: InStock

XAWL603- Wireless UHF Dual Channel Universal Lavalier Microphone

• Compact and Quick Pairing: Ultra-light weight of 52g with fast pairing feature that connects to the receiver within 5 seconds from your mobile or DSLR camera. Just plug in the receiver to your device and wait till the pairing indication flashes.
• Transmission Rate for UHF transmitters and receiver: 500-690Mhz with 10dBm transmission power that ensures low level of latency and increases audio quality and clarity
• Work Time: XAWL303 wireless transmitters and receiver have a work time of 4-5 hours. Charging time for the mic and receiver is 2 hours each. USB type-C computer cable provided in-box.
• Wireless transmitters have a provision to plug in additional lavalier microphones in each mic for clear and crisp sound recording. Move around freely and adjust wire length of mic as per requirement.
• Monitor Port for Audio monitoring, Playback Port for real-time music output, Volume indicator for volume level, power indicator for power status indication and sturdy back clip provided for microphones and receiver for smartphone and camera pairing.

Xtreme Acoustics XAWL603 Dual channel wireless microphone system

UHF all-purpose dual channel wireless microphone

The two transmitters and receiver have upto 5hrs of heavy usage and take 2hrs to fully charge with an e ective working range of upto 25ft-30ft. The microphone is best suited for audio and video recording for YouTube, Interview, Talk Shows and Podcasting.

Transmitter A & B

1. Battery: 3.7V/400mAh, 2. Charging Voltage: 5V±0.25V; 3. Working Time: 4 hours

4. Working Current: 103MA±15MA, 5. Transmitted Power: 10DBM, 6. Standby Current: 45UA, 7. Frequency: 470MHZ-928MHZ

Receiver

1. Battery: 3.7/1000Mah, 2. Charging Voltage: 5V±0.25V, 3. Working Current: 89MA±5MA

4. Standby Current: 30UA 5. Frequency: 470MHZ-928MHZ 6. Frequency Response: 80Hz-10KHz 7. Working Time: 4 hours

Caters to all the content creators!

SOME POINTERS

The charging is done using the USB to Type C charging cable. Both the transmitter and receiver can be charged at the same time.
For Camera/ Mixers/ Amplifiers:- Use a TRS TO TRRS Cable. For mobile phones/Computers:- Use a TRRS TO TRRS Cable.
Some Android versions are not suitable for their own camera app. In such cases, download the camera app separately.
The mic has at least 4 Hrs of heavy usage time, over 2hrs of charging time, an inbuilt condenser and an effective working range of over 25 feet.
External microphone jack has a provision of connecting the mic with TRS connection (Xtreme Acoustics- Lavalier condenser microphone). Plug-in the external lavalier mic (LM-01) on to the mic jack of the transmitter , and shift the knob to the Camera mode (after put in the cell given in the Lavalier mic box). Once the recording is done, shift the knob to the ‘switch off’ mode.

Note- This wireless mic has a transmitter and a receiver with 3.5 mm jack, meant for use with mobile devices and computers with 3.5mm connection. For Type-C or Iphones, get an original OTG adapter.

Perfect wireless mic solution with wide compatibility!

Wireless mic Pairing tip- if the existing pairing gets disconnected

ATTENTION:- The devices are paired at the factory level (pls do not disturb the existing pairing, DO NOT TOUCH THE FREQUENCY BUTTON ON TRANMITTER/ RECEIVER), if it gets disconnected due to the interference reasons, follow the steps below to reconnect it again:-

Turn on the microphone and the receiver at the same time. Long press the frequency pairing button of the transmitter for 2sec till the power light starts flashing. Now long press the frequency pairing button of the receiver for 2sec, the signal light flashes for three times. Once the flashing stops, press the mic pairing button once. Now both the pairing lights will remain stable and will stay turned on, that shows that the pairing is done successfully.
Monitor indicator- when the green indicator is on, the monitor function is on, when the indicator is off, the monitor is mute. Monitoring can be done using the standard 3.5mm monitor interface using headphones or monitor speakers.
The volume indicator light flashes slowly for each volume adjustment. When level 1, indicator light flashes one time. When level 2, indicator light flashes two. When level 3, indicator light flashes three. Preferably, keep the mic volume at level 2 to avoid the shrillness in the audio.

Be it travel vlogs, online classes, cooking videos, work from home or an interview- you know that your audio output is always intact. It is suitable for all types of devices such as Smartphones, Cameras, Laptops, PA systems, Mixers etc. XAWL603 has stable signals, clear audio capture and wide range of usage make it a high performance microphone.

In-built microphone

It has an internal electret microphone. If no external microphone is plugged in, the transmitter will use an internal microphone.

RX- Monitor indicator, Headphone features

Monitor indicator- when the green indicator is on, the monitor function is on, when the indicator is off, the monitor is mute.
Monitoring can be done using the standard 3.5mm monitor interface using headphones or monitor speakers.

External mic features

External microphone provison with 3.5mm input.

XAWL603- Wireless UHF Dual Channel Universal Lavalier Microphone

Xtreme Acoustics XAWL603 Dual channel wireless microphone system